Kia Ceed - Page 431

6107
Driving your vehicle
Warning message
The message (“Speed Limit Warning
system disabled. Camera blocked”)
will appear when camera’s field of
view is covered by some objects. The
system stops until the field of view is
normal.
Check the windscreen around the
camera view area.
If the system does not work normally
even though camera’s field of view is
cleared, have the system checked by
a professional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.
When Intelligent Speed Limit
Warning is not working properly, the
warning message (“Check Speed
Limit Warning system”) will come on
for a few second. After the message
disappears, the master warning light
will illuminate.
In this case, have the system
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The ISLW may not operate or may
not provide correct information in the
following situations.
 When the traffic sign condition is
poor
- The traffic sign is located on a
sharp curve.
- The traffic sign is improperly posi-
tioned (i.e. being turned over,
blocked by an object, and
dameged).
- Another vehicle blocks the traffic
sign.
- The LED light of the traffic sign is
broken.
- There is bright light around the traf-
fic sign.
- If road signs do not correspond to
the standard and etc.
 When external condition is inter-
vened
- Your vehicle drives right after
another vehicle.
- The bus or truck, on which the
speed sticker is attached, passes
by your vehicle.
- Your vehicle drives in an area,
which is uncovered by the naviga-
tion system.
- There is a malfunction with the
navigation.
- Your navigation has not been
updated.
- Your navigation is being updated.
- There is something wrong with
GPS.
- If the top speed limitations stored
in the navigation system are incor-
rect.
- As a result of incorrect detection by
the camera.
- When calibrating the camera
immediately after vehicle delivery
and etc.