Kikusui PAS 10-35 - Safety Precautions

II SafetyPrecautions PASSERIES
Safety Precautions
The following safety precautions must be observed to avoid
fire hazard, electrical shock, accidents, and other failures.
Keep them in mind and make sure that all of them are
observed properly. Using the product in a manner that is not
specified in this manual may impair the protection functions
provided by the product.
Users
• This product must be used only by qualified
personnel who understand the contents of this
manual.
• If it is handled by disqualified personnel, personal
injury
may result. Be sure to handle it under
supervision of qualified personnel (those who have
electrical knowledge.)
• This product is not designed or produced for home-
use or use by
general consumers.
Purposes of use
• Do not use the product for purposes other than
those described in the manual.
Input power
• Use the product with the specified input power
voltage.
• For applying power, use the AC power cord
prov
ided. Note that the provided power cord is not
use with some products that can switch among
different input power voltages or use 100 V and 200
V without switching between them. In such a case,
use an appropriate power cord. For details, see the
relevant page of this manual.
Operation
Manual
Line
Voltage