PAS SERIES Safety Precautions III
Cover
• There are parts inside the product which may cause
physical hazards. Do not remove the external cover.
Installation
• When installing products be sure to observe "1.2
Precautions for installation" described in this
manual.
• To avoid electrical shock, connect the protective
grou
nd terminal to electrical ground (safety ground).
• When applying power to the products from a
switch
board, be sure work is performed by a
qualified and licensed electrician or is conducted
under the direction of such a person.
• When installing products with casters, be sure to
lock the casters.
Relocation
• Turn off the power switch and then disconnect all
cables when relocating the product.
• Use two or more persons when relocating the
pro
duct which weights more than 18 kg. The weight
of the products can be found on the rear panel of the
product and/or in this manual.
• Use extra precautions such as using more people
when re
locating into or out of present locations
including inclines or steps. Also handle carefully
when relocating tall products as they can fall over
easily.
• Be sure the manual be included when the product is
reloca
ted.
To Next Page
Loading...
