IV Safety Precautions PAS SERIES
Operation
• Check that the AC input voltage setting and the fuse
rating are satisfied and that there is no abnormality
on the surface of the AC power cord. Be sure to
unplug the AC power cord or stop applying power
before checking.
• If any abnormality or failure is detected in the
products
, stop using it immediately. Unplug the AC
power cord or disconnect the AC power cord from
the switchboard. Be careful not to allow the product
to be used before it is completely repaired.
• For output wiring or load cables, use connection
cabl
es with larger current capacity.
• Do not disassemble or modify the product. If it must
be modif
ied, contact Kikusui agent/distributor.
Maintenance and checking
• To avoid electrical shock, be absolutely sure to
unplug the AC power cord or stop applying power
before performing maintenance or checking.
• Do not remove the cover when performing
maintena
nce or checking.
• To maintain performance and safe operation of the
product,
it is recommended that periodic
maintenance, checking, cleaning, and calibration be
performed.
Service
• Internal service is to be done by Kikusui service
engineers. If the product must be adjusted or
repaired, contact Kikusui agent/distributor.
To Next Page
Loading...
