Kikusui TOS5200 - Selecting Items; Entering Values

TOS5200 35
Panel Operations
Panel Operation Basics
4
Selecting items
p. 41
To select an item, use the SET, UPR/ LWR, or TEST key.
If the item that you want to select is not displayed, press LIMIT (SHIFT+SET), ON/OFF
(SHIFT+UPR/LWR), ON/OFF (SHIFT+TEST), or press MORE key.
When you enter the setup screen for additional test conditions (MORE) or a CONFIG setup
screen, the MEMORY 2 and MEMORY 3 keys become left and right movement keys.
p. 42
Entering values
You can set the value of the blinking item by turning the rotary knob.
If you hold down SHIFT and turn the rotary knob, you can change the setting resolution.
While you hold down SHIFT, the values change quickly.
See
A
kV
Mȍ
mA
CONFIG
RISE TEST
RMS AVE MORE CAL RMT
MT
LIMIT
50Hz 60Hz
UPPER
LOWER W COMP
s
1
2
3
READY
TEST
PAS S
FAIL
PROTECTION
SET UPR/LWR TEST MORE
LIMIT ON/OFF ON/OFF KEY LOCK
LOCAL
S
HIFT
On the basic setup screen, press SET to select the voltage.
Example: Selecting the voltage (blinking)
A
kV
Mȍ
mA
CONFIG
RISE TEST
RMS AV E MO RE CA L R M T
MT
LIMIT
50Hz 60Hz
UPPER
LOWER W COMP
s
1
2
3
READY
TEST
PAS S
FAIL
PROTECTION
On the basic setup screen, hold down SHIFT and press SET to select the limit voltage.
Example: Selecting the limit voltage (blinking)
SET UPR/LWR TEST MORE
LIMIT ON/OFF ON/OFF KEY LOCK
LOCAL
S
HIFT
MORE
See
A
kV
Mȍ
mA
CONFIG
RISE TEST
RMS AVE MORE CAL RMT
MT
LIMIT
50Hz 60Hz
UPPER
LOWER W COMP
s
1
2
3
READY
TEST
PAS S
FAIL
PROTECTION
1
MEMORY
2
3
RECALL
Example: Selecting the frequency (blinking)
A
kV
Mȍ
mA
CONFIG
RISE TEST
RMS AVE MORE CAL RMT
MT
LIMIT
50Hz 60Hz
UPPER
LOWER W COMP
s
1
2
3
READY
TEST
PAS S
FAIL
PROTECTION
Turn the rotary knob to set the value.
ACW
FUNCTION
Rotary knob
ACW
FUNCTION
Rotary knob
LOCAL
S
HIFT