E3 4K HDMI/3G-SDI Encoder User Manual
13
Copyright@2023 KILOVIEW Electronics Co., LTD
The default web service port is 80 (https port is 443). You can change it (range: 1-
65535) accordingly. After revising the port, visit device configuration page. You need
to add the changed port behind the device IP address before you visit. For example,
the device normal login IP address is 192.168.1.168, change Web service port from
80 to 90, HTTPS service port from 443 to 450, then enter 192.168.1.168:90 or
https://192.168.1.168:450 to visit device respectively.
By HTTPS, if the web browser prompts certificate errors which is caused by the
browser certificate security authentication, you will need to add it to the safe list of
the browser.
Routing Strategy
The routing strategy is for routing release and reception. Its operation object is data
package. According to the needs, the data packet transmission path can be changed
according to a certain strategy. When the device is connected to multiple network
links, the different data link can be sent according to the appointed network link
through designated strategy, which improves the utilization efficiency of the link.
Note：It is required that professional person with knowledge of the current network routing
table or network to operate routing strategy. Incorrect configuration may cause device abnormal.
To Next Page
Loading...
Need help?
General
