E3 4K HDMI/3G-SDI Encoder User Manual
12
Copyright@2023 KILOVIEW Electronics Co., LTD
There are two ways to get the address, one is DHCP, and the other is manual. To use
DHCP, please ensure that the router or switch has enabled the DHCP service. This
method is simple and convenient, but the IP obtained by DHCP changes continuously,
and you cannot directly know what IP address the encoder gets.
To select manual IP address obtaining, you need to enter a fixed IP to the device, and
this IP address is fixed as long as the device does not restore the factory settings,
which is relatively stable. The automatic allocation is to automatically allocate an IP
address according to the MAC address of the device. If the device needs to share the
network with other devices, this method can avoid the problem of IP address
conflicts, but the IP address allocation strategy needs to be maintained regularly.
Manual assignment and automatic allocation both have their own advantages and
disadvantages, depending on the specific requirements. Therefore, the choice
between manual assignment and automatic allocation can be made based on the
actual needs.
6.2.2 Advanced Settings
HTTP/HTTP Setting
To Next Page
Loading...
Need help?
General
