Kiloview E3 User Manual

E3 4K HDMI/3G-SDI Encoder User Manual
30
Copyright@2023 KILOVIEW Electronics Co., LTD
Note: After enabling this function, the mDNS automatic discovery function is invalid. The
video stream output by the encoder can only be sent to the specified server, and the receiver must
register with the same discovery server to pull the NDI stream.
8.3 RTSP
The encoder can add one RTSP stream by default. As long as the RTSP stream is not
being pulled and decoded, there will be no additional load on the encoder. As shown
in the figure below, if the IP address of the encoder is 192.168.43.228, and the set
service port is 554, then the stream address of the RTSP service is
rtsp://192.168.43.228:554/ch01.

Kiloview E3 Specifications

General

Brand	Kiloview
Model	E3
Category	Media Converter
Language	English