Kiloview E3 User Manual

E3 4K HDMI/3G-SDI Encoder User Manual
29
Copyright@2023 KILOVIEW Electronics Co., LTD
The NDI encoder configures the receiving end IP address in the discovery server, and
NDI will register to the server. It is recommended that the receiving end address be
configured as a static IP address to prevent NDI connection loss caused by IP
reassignment.
Click "Discovery Server" on the configuration page of the decoder, open the function,
and set the discovery server address as the IP address of the computer (The one that
open discovery server function). After saving the configuration, the receiving end can
discover the NDI streams registered to the server.

Kiloview E3 Specifications

General

Brand	Kiloview
Model	E3
Category	Media Converter
Language	English