E3 4K HDMI/3G-SDI Encoder User Manual
28
Copyright@2023 KILOVIEW Electronics Co., LTD
Connection: There are two connection modes: UNICAST and MULTICAST, and
UNICAST is used for transmission by default. UNICAST is a one-to-one
communication mode between devices, and multicast is a device-to-group
communication mode, that is, devices that join the same group can receive all data
sent by the device.
Server Address: Register the discovery of the source with the discovery server. See
the Discovery Server section for details.
After the configuration is completed, the user can find and output the NDI source via
NDI-based software, and distinguish different NDI sources by the device name and
channel name.
8.2 NDI Discovery Server
The NDI discovery server can replace NDI automatic discovery with a server, all NDI
sources are registered to the server, and the receiving end obtains the NDI source
from the server. Users can also configure this function to send the output video
stream to the receiving end across network segments.
Use a computer (server) to log in to the NEWTEK official website (https://ndi.tv/sdk/)
to download and install the NDI SDK. After installation, run Bin\Utilities\x64\NDI
Discovery Service.exe in the installation directory.
To Next Page
Loading...
Need help?
General
