KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
display enters the setting state.In the setting interface, shortly press MODE to
switch setting items.
5.11.1 Trip Clearance Setting
TC stands for Trip Clearance, setting parameters can be N/Y. The default N
means that the mileage of a single ride is not cleared. Y/N can be selected
through UP/DOWN, Y means that the mileage of a single ride needs to be cleared.
Trip clearance interface
Trip distance and Trip time will be cleared at the same time.
5.11.2 Backlight Brightness
BL stands for backlight. Parameters 1, 2, and 3 can be set to indicate the
brightness of the backlight. The factory default value is 1. The backlight brightness
parameter can be changed by UP/DOWN. 1 is the darkest and 3 is the brightest.
To Next Page
Loading...
Need help?
General
