KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
Backlight brightness setting interface
5.11.3 Display Unit (Metric/Imperial)
Unit represents the display unit. The parameter Metric/Imperial can be set.
The factory default is metric. The parameters can be changed by UP/DOWN.
Unit setting interface
5.11.4 Exit setting
In the setting state, shortly press MODE button to confirm the input and enter the
next setting; and hold MODE button to save and exit the setting state.
To Next Page
Loading...
Need help?
General
