KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
The display automatically exits the setting state without any operation for 1
minute.
5.15 Restore Default Setting
DEF means to restore the default parameters. Hold UP and MODE buttons
simultaneously for 2 seconds to enter the Restore Default Parameters interface.
Switch Y/N with UP/DOWN. Y indicates that the default parameters need to be
restored. Hold MODE to confirm. If you select Y, you need to enter the permission
password to restore the default parameters.
Restore default setting
The permission password is 0368. Press MODE to shift and increase/decrease
the value by UP/DOWN. After the 4-digit password is entered, press MODE to
confirm. The display will automatically exit after successful recovery.
Password input
To Next Page
Loading...
Need help?
General
