KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
PAS sensor proportion parameter setting
5.14.6 Speed Sensor Setting
SPS indicates the speed sensor setting. It can be set according to the number of
magnet heads mounted on the wheel of the e-bike, and the setting range is 1-9.
Modify it by pressing UP/DOWN. Hold MODE to confirm and return to the
personalized parameter setting interface. The factory default value is 1.
Speed sensor setting
To Next Page
Loading...
