KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
Max speed limit setting
5.14.8.3 Button Walk Assist Enable Setting
PUS indicates the button walk assist function enable setting. Switch Y/N by
UP/DOWN. Y means enable, that is when hold DOWN, the walk assist function
realizes; N means disable, that is, there is no walk assist function. Shortly press
MODE to confirm, and enter the walk assist speed setting. The factory default
value is Y.
Button walk assist enable setting
5.14.8.4 Walk Assist Speed Setting
PUS indicates the button walk assist speed setting. By setting the walk assist
speed value, you can adjust the pushing speed to meet the needs of different
riders. Adjusted by UP/DOWN, the adjustable range is “20-35”. Press MODE to
confirm and enter the slow start setting interface. The display defaults to 25 (ie,
25% output).
To Next Page
Loading...
Need help?
General
