A75UM3EF (Ver. E.2)
3-110
[Reference]
If you select either “Layout b.” or “Layout c.”, the Auto Zoom Mode is automatically selected and it
decides the proper zoom ratio for each original one by one.
However, it is possible not to use the Auto Zoom Mode but to decide the zoom ratio manually.
Be careful of the following matters in this case.
1. In case of the “Layout b.”
If the copy image is wider than the used roll media and its right side part goes out of the copying
media because the zoom ratio is large, that part is lost.
If the copy image is narrower than the used roll media because the zoom ratio is small, some
margin is provided to the right of it to fill in the empty space.
To Next Page
Loading...
