A75UM3EH (Ver. E.2)
3-122
3.9.1 Calling the Mode Memory
[Function]
Mode Memory is a convenient function to change several user settings easily to your preferable
conditions that you registered in advance.
If you often do copying changing several settings in a specific state, it is possible to register that state
of settings as the Mode Memory (Creation of Mode Memory).
If only you call the created Mode Memory, you can easily change each user setting to the registered
condition without losing the time.
It is possible to select any of 10 different kinds of Mode Memory.
In the Mode Memory Selection Screen, you can just select your preferable Mode Memory and call it.
As for the way to create the Mode Memory, refer to “Mode Memory (Creation and deletion of
Mode Memory)” on the page 3-157.
[How to call the Mode Memory]
1) Push the Mode Memory Key to indicate the Mode Memory Selection Screen on the LCD.
The screen indicates the state of each user setting registered to the selected Mode Memory
Number.
(Mode Memory Key) (Mode Memory Selection Screen)
Note : If the Mode Memory is not created on some Mode Memory Number at present, that number
is colored with gray and it is impossible to select it.
If no Mode Memory is created at present, the states of settings are not indicated and Mode
Memory Numbers from 1 to 10, “Call” and “Next Page” become gray.
(Mode Memories are created on No.1, 2 and 3.) (No Mode Memory is created at present.)
PAPER
FUNCTION
BASIC SCREEN
MODE MEMORY
MENU
REFERENCE
0%
001
Mode Memory
Call Next Page
1 6
27
38
49
510
Count :10
Roll 2
150.0%
Line/Photo
Background
Threshold :Auto
Density :3
Mirror :OFF
Folder :OFF
Synchro
Sharpness :5
Negative :OFF
0%
001
Mode Memory
Call Next Page
1 6
2 7
3 8
49
510
Count :1
Roll 2
250.0%
Line
Background
Threshold :Auto
Density :3
Mirror :OFF
Folder :2
Synchro
Sharpness :2
Negative :OFF
0%
001
Mode Memory
Call Next Page
16
27
38
49
510
To Next Page
Loading...
