KIP 2050 - Chapter 3 Operation; 3.1 Introduction to Operations; 3.2 Basic Screen Overview; 3.3 Copying Media Settings

A75UMCON (Ver. E.2)
6
Chapter 3 Operation
Page
3.1 Introduction
3- 1
3.2 Basic Screen
3- 2
3.2.1 Copy Count setting (Number of copies) 3- 5
3.3 Copying Media Settings
3- 6
3.3.1 Roll media feeding 3- 7
A. Automatic roll selection (Auto Paper Mode) 3- 7
B. Manual roll selection 3-10
3.3.2 Sheet media feeding 3-11
A. Automatic sheet size selection (Auto Sheet Size Mode) 3-11
B. Manual sheet size selection 3-15
3.3.3 Cut Modes 3-17
A. Synchro Cut 3-17
B. Standard Cut 3-19
3.3.4 Divide Mode 3-22
3.4 Zoom Settings
3-27
3.4.1 Auto Zoom Mode 3-28
A. In case of the roll media feeding 3-28
B. In case of the sheet media feeding 3-31
3.4.2 Standard Zoom Ratio 3-33
3.4.3 % Mode (Direct selection of percentage) 3-35
3.4.5 Media Size Mode (Ratio between original size and media size) 3-37
3.4.6 Zoom Program Mode 3-38
3.4.7 XY Zoom Mode 3-40
3.5 Image Quality Settings
3-44
3.5.1 Selecting original’s image type 3-45
3.5.2 Background Mode 3-47
3.5.3 Despeckle Mode
3-51
3.5.4 Threshold 3-54
A. Function of Threshold Level in the Line Mode 3-56
B. Function of Threshold Level in the Line/Photo Mode 3-58
C. Function of Threshold Level in the Photo Mode 3-60
3.5.5 Sharpness 3-62
3.5.6 Density 3-64
3.6 Function Settings
3-66
3.6.1 Shift and Centering 3-67
A. Shift 3-68
B. Centering 3-71
3.6.2 Leading Edge and Trailing Edge 3-73
3.6.3 Folder Setting 3-79
3.6.4 Mirror Image Mode 3-80
3.6.5 Negative Image Mode 3-82
3.7 Date Stamp Settings
3-84
3.7.1 How to print the Date Stamp 3-85
3.7.2 Main position of Date Stamp 3-90
3.7.3 Rotation of Date Stamp 3-91
3.7.4 Horizontal shift and vertical shift of Date Stamp 3-92
3.7.5 Order of date and time 3-95
3.7.6 Type of Date Stamp 3-96