Kirisun DP990 User Manual

DP990 DMR Two Way Radio User Manual
“Information Alert Tone” – enables/disables the alert tone of receiving short message.
“Finished Call Alert Tone” – enables/disables the alert tone of finished call.
Press OK key and the LCD will show “Operation Succeeded” and save the alert tone.
9.2.2 Adjusting the Volume of Alert Tone
1) In the alert tone setting interface, select and enter the “Alert Tone Volume” interface.
2) Press【Up】 key or 【Left】 key to increase the alert tone volume. Press【Down】 key or 【Right】
key to decrease the volume.
3) Press OK key and the LCD shows “Operation Succeeded” . The alert tone volume will be saved.
9.3 Vibration Setting
You can enable/disable the vibration feature.
1) Press in the home screen to enter the menu.
2) Select and enter “ setting” menu.
3) Select “Vibration Setting” and enter the interface.
You can enable/disable the vibration alerts below:
“All Vibration Off” –disable vibration of all types.
“All Vibration On” – enable vibration of all types.
“Call Alert” – enables/disables the vibration call alert.
“Incoming Call” – enables/disables the vibration alert of private call.
“Short Message” – enables/disables the vibration alert of receiving short message.
“Emergency Alarm”- enables/disables the emergency vibration alert.

Kirisun DP990 Specifications

General

Brand	Kirisun
Model	DP990
Category	Two-Way Radio
Language	English