KMC Controls FlexStat User Manual

FlexStat 43 Operation Guide, Rev. R
Index
A
Abbreviations: 41
About the FlexStat: 6
Access Levels, Password: 18
Accessories: 29
Acronyms: 41
Adapter Backplate, HTO-1103: 29
Adjustment. See Configuration; Override; Setpoint
Administrator Password: 18
Advanced Menu: 7
AI1 (Temp. Sensor): 9, 20, 23
AI2 (DAT or FST): 9, 20, 23
AI3 (MAT): 23
AI4 (OAT): 10, 20
AI5 (Humidity Sensor): 20, 23
AI7 (Remote Temp. Sensor): 9, 23
AI9 (Remote CO2 Sensor): 9, 20, 23
AI10 (CO2 Sensor): 20, 23
Air Handling Unit (AHU): 42
Alarms: 7, 9, 23, 30
Altitude. See Elevation Correction/Setting
Analog Outputs: 26, 36
Application
After Return to Factory Default: 27
Application Software Version (ASV): 6
Configuration and Options: 3, 7
ASHRAE Standard 62: 12
ASV (Application Software Version): 6
Auto, Off, Heat, or Cool (System Enable): 25
Auxiliary Heat, Heat Pump: 7
AV22 (Humidity): 20
AV23 (OAT): 20
AV40 (Space Temperature): 20, 23
AV78 (Space CO2): 20, 23
B
Backlight: 5, 21
Backplate: 3, 31
Back-Up Issues: 30
BACnet: 3, 14, 28, 31
BACnet (Building Automation Control Network): 42
Baud Rate: 28
BI6 (Motion Sensor): 20
Binding, Cover on Backplate: 31
Blanking, Display: 5, 21
Board Revision: 6
Build Date: 6
BV4 (Low Limit Condition): 23
BV5 (Fan Fail Alarm): 23
BV24 (Motion Sensor Occupancy Override): 20
BV35 (Motion Sensor Standby): 20
C
Calibration
Analog Input Offset: 17
CO2 Sensor (Gas): 17
Temperature Offset: 17
CA Title 24: 12
CO2 Sensor: 11, 21, 33
Cold Start: 26
Communication
MS/TP, Ethernet, and IP: 14
Settings: 14
Troubleshooting: 14, 30
Compressor Lockout: 7
Conductors: 39
Conduit: 39
Configuration (Setup): 6
Contrast, Display: 21
Control Basic Programs: 10, 27, 33
COOL
INTG (Integral): 18
PROP (Proportional Band): 18
Cool, Heat, Auto, Off (System Enable): 25
Coordinated Universal Time (UTC): 16
Cover: 31
Custom
Programs: 10, 29, 33
Web Graphics: 33
CUSTOM in ASV: 6, 36
D
Damper Setup: 7, 13
DAT. See Discharge Air Temperature (DAT)
Data Port: 28, 30
Date: 5, 16, 21, 23, 35
Daylight Saving Time (DST): 16
DCV. See Demand Control Ventilation (DCV)
Deadband: 18
Decimals (Tenths), Display: 5, 21
Definitions of Terms: 42
Dehumidification Option: 8
Delay
Auxiliary Heat: 7
Fan: 8, 26
Demand Control Ventilation (DCV)
And CO2 Sensor: 11
Menu under Main Menu: 24
Setup Menu Under Damper Setup Menu: 7, 11
Troubleshooting: 33, 34

KMC Controls FlexStat Specifications

General

Brand	KMC Controls
Model	FlexStat
Category	Thermostat
Language	English