26
5. Installation
5.1 Selection of qualified personnel
It is advisable to have trained KNECHT personnel perform the installation
work on the sharpening machine.
We assume no liability for damage caused by improper installation.
CAUTION
5.2 Installation site
When determining the installation site, bear in mind the space requirement for installation,
maintenance and repair work on the sharpening machine (see Chapter 3.2).
The machine may only be stored or operated in dry rooms. Temperature must be between +10°C
and +35°C.
5.3 Supply connections
The sharpening machine is delivered ready for connection with the appropriate connection cable.
Confirm that the machine is correctly connected to the current supply.
CAUTION
5.4 Settings
The various components and the electrics are adjusted by KNECHT Maschinenbau GmbH before
delivery.
ATTENTION
Unauthorised changes to set values are not
permitted and may damage the sharpening
machine.
.
To Next Page
Loading...