42
8.4 Modifying product data
Press the touch panel button “F8 Settings” (8-
10/1) to change to the “Settings” menu (8-11).
Press the touch panel button “F5 Product Data”
(8-11/1) to change to the “Product Data” menu
(8-12).
Select the desired parameters in the tree and
change the value.
Save with “F9 Adopt”.
ATTENTION
Unauthorised and improper changes to the
product data can cause damage to the ma-
chine and / or knife.
8. Control system
Figure 8-10 Main screen
Figure 8-11 Settings
Figure 8-12 Changing the product data
1
12
1
To Next Page
Loading...