4
1. Important notes 7
1.1 Foreword 7
1.2 Warnings and symbols in the operating instructions 7
1.3 Warning plates and their meaning 8
1.3.1 Warning and prohibition signs on / in the sharpening machine 8
1.3.2 General mandatory signs 8
1.4 Rating plate and machine serial number 9
1.5 Figure and item numbers in the operating instructions 10
2. Safety 11
2.1 Basic safety instructions 11
2.1.1 Observe notes in the operating instructions 11
2.1.2 Operator's duty 11
2.1.3 Obligations on the part of the personnel 11
2.1.4 Hazards associated with the handling of the machine 11
2.1.5 Malfunctions 12
2.2 Proper use 12
2.3 Warranty and liability 12
2.4 Safety regulations 13
2.4.1 Organisational measures 13
2.4.2 Protective devices 13
2.4.3 Informal safety measures 13
2.4.4 Selection and qualifications of the personnel 13
2.4.5 Machine control system 14
2.4.6 Safety measures in normal operation 14
2.4.7 Dangers due to electrical power 14
2.4.8 Particular hazard areas 14
2.4.9 Servicing (maintenance, repair) and fault rectification 15
2.4.10 Structural alterations to the sharpening machine 15
2.4.11 Cleaning the sharpening machine 15
2.4.12 Oils and greases 15
2.4.13 Relocation of the sharpening machine 15
3. Description 17
3.1 Use as intended 17
3.2 Technical specifications 17
3.3 Functional description 18
3.4 Description of the assemblies 19
3.4.1 Control panel 21
3.4.2 Switching the sharpening machine on / off 21
3.4.3 Layout of the user interface (main screen) 22
Table of Contents
To Next Page
Loading...