7
1.1 Foreword
These operating instructions are designed to make it easier to get to know the Fully Automatic
Hand Knife Sharpening Machine, referred to in this document as sharpening machine, and to use
it properly for the intended purpose.
The operating instructions contain important information on how to operate the sharpening
machine safely, properly and cost-effectively. Observance of these instructions helps to avoid
dangers, repair costs and downtimes, and increases the reliability and service life of the sharpen-
ing machine.
The operating instructions must always be accessible at the place of use of the sharpening
machine.
The operating instructions must be read and used by all persons entrusted with working on the
sharpening machine, e.g. those entrusted with
• Transport, installation, commissioning
• Operation, including troubleshooting in the process flow, as well as
• Servicing (maintenance, repair).
In addition to the operating instructions and the binding accident prevention regulations
applicable in the country and place of use of the machine, the generally acknowledged rules of
technology with regard to safe and professional work practices are to be observed.
1.2 Warnings and symbols in the operating instructions
Heeding the following safety alert symbols / designations used in the operating instructions is
absolutely necessary:
The hazard triangle with the signal word “CAUTION” is used as a work
safety indication for all work which could result in death or physical injury.
Special care and caution must be taken when carrying out such jobs.
ATTENTION
The signal word “ATTENTION” is used to call attention to hazards which
could result in damage and / or destruction of the sharpening machine or its
environment if special attention is not paid while carrying out particular
jobs.
NOTICE
The signal word “NOTE” calls attention to tips on use and useful
information.
1. Important notes
CAUTION
To Next Page
Loading...