43
8.5 Setting up an internet connection
The machine has a network connection port
which can be used to establish a direct connection
between the machine and KNECHT Maschinen-
bau. The contents of the display screen of the
sharpening machine are transferred via this con-
nection. In this way, the manufacturer's techni-
cians can perform a diagnosis of the machine,
change software settings and install or edit new
grinding programs.
“Team Viewer”, the program pre-installed on your
machine, is needed for setting up the internet
connection. An active internet connection must be
available.
For that, please connect the network cable pro-
vided with the machine to the network socket
provided on site and the network socket (8-13/1)
on the backside of the switch cabinet.
NOTICE
Please have the internet connection set up by
your network administrator.
8. Control system
Figure 8-13 Power supply connection
1
To Next Page
Loading...