A-61316 September 2004 2-5
13 Memory Input indicator - allows you to store one of the following
functions into the memory of the scanner.
• Negative or positive
• Print mode
• Output Format
• Print image density
• Exposure mode
• Centering or Fit
• Masking
• Auto Skew Correction
• Horizontal Area setting
• Vertical Area setting
• Electrical Zoom
• Resolution
• Image Distortion Correction
14 Clear/Stop key - use this key to clear the setting on the Multi-Print
display, reset the Multi-Print display to "1" or stop a multi-print cycle.
This key also provides a Shift function. See the next section for more
information regarding using this function.
15 Multi-Print key - used to set the number of prints when printing
continuous or multiple pages. The value of this setting increases by
one (1, 2, 3...) every time the key is pressed (maximum 19). (Laser
Printer mode only)
Start key - press to print (scan) the displayed image.
To Next Page
Loading...
