Kodak 8383697 - Capture Pro Software - Selecting PDF as Your File Format

4-54 A-61635 December 2010
Selecting PDF as your file format:
If you select PDF as your file format to process your output, the PDF Setup
dialog box will be displayed.
1. Select either Single-Page or Multi-Page as the way to group your image
files in output. Every input (scanned) image file will be a separate output
file.
• If you select Single-Page, every image you scan is a separate image
file in output. Therefore, if you scan a page, you will have two separate
image files in output (one for the front and one for the back). If you are
scanning dual stream, you will have four image files in output.
• If you select Multi-Page, the For each drop-down list becomes
available.
- For each: Page — every image for every page scanned becomes one
file. When you open the file, there will be two images, one for the front
and one for the back. If you are scanning dual stream, you will have four
images.
- For each: Document — every page scanned into one document will
become the contents of one file. There may be several (or many)
images in one file.
- For each: Batch — all images scanned into the batch will become one
output file. There may be many images in the output file.
2. Select a PDF format from the drop-down list: PDF, PDF/A, PDF-MRC, or
PDF-A&PDF-MRC.
3. If you selected PDF-MRC or PDF-A&PDF-MRC as your PDF format,
select the desired Image quality: Draft or Better.
4. When finished, click OK.