Chapter 3
Loading Envelopes
You can load plain envelopes into the paper tray of your Kodak ESP·3 All-in-One printer.
Important Do not use envelopes with cutouts or cellophane windows.
1 Remove any other paper from the paper tray.
2 Insert one or more envelopes into the right side of the paper tray with the print side down and
the envelope flaps on the right, pointing left.
3 Squeeze the paper-width guide and move it to its right-most position up against the envelopes.
4 Leave the paper tray open while the envelopes are loaded.
18 Kodak ESP·3 All-in-One
To Next Page
Loading...
