Chapter 8
No Communication with Computer
Probable Cause
Your Kodak printer is not connected to your computer.
Corrective Action
• Make sure your printer is plugged in and turned on.
• Make sure you are using the proper USB cable.
• Check the connection from your computer to your printer. Ensure that the square end of the
USB cable is plugged in to the USB port on the back of your printer, and the flat end into a USB
port on your computer.
• You may need to disconnect other printers or scanners from your computer.
• After checking connections, restart your computer.
• Make sure your computer meets the minimum system requirements. Upgrade your system if
necessary.
For more information on connecting your printer to your computer, see the Setup Guide that came
with your printer.
No Paper Feed
Probable Cause
The paper tray may be empty, or there may be a problem with the paper in the tray.
Important KODAK Inkjet paper is recommended for your Kodak All-in-One printer.
Corrective Action
If the tray is empty, load paper into the paper tray, then resume printing. Check for a message on
the printer status monitor (Windows) on your computer. Check for a problem with the paper in
the tray.
48 Kodak ESP·3 All-in-One
To Next Page
Loading...
Need help?
General
