Chapter 4
Transfer to a Macintosh computer
To transfer from a PictBridge camera
1 On the front printer panel, connect a PictBridge camera to the USB port.
2 When a transfer or connection message appears on your computer monitor, click Yes.
3 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer.
To transfer from a memory card
1 On the front printer panel, insert a memory card into one of the memory card slots.
2 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer.
To transfer from a USB storage device
1 On the front printer panel, insert a USB storage device into the USB port.
2 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer.
Print Pictures from a PictBridge Camera
You can print pictures on your Kodak ESP·3 All-in-One printer directly from a PictBridge camera.
The camera controls the photo selection and printing.
1 Load the paper tray with photo paper, print side down.
2 Connect a PictBridge camera to the USB port. The first photo is displayed on the camera.
3 Use your PictBridge camera to select and print the pictures.
Print from a Bluetooth Device
The Kodak ESP·3 All-in-One printer allows you to print from a Bluetooth device. Bluetooth is a
short-range radio technology that allows wireless connectivity between electronic devices.
Bluetooth connectivity is supported using an optional Kodak USB Bluetooth Adapter that accepts
JPEG/EXIF image file types. You can purchase a Bluetooth Adapter directly from Kodak at
www.kodak.com/go/accessories
.
To enable Bluetooth wireless connectivity, plug your Kodak Bluetooth Adapter into the front USB
port. When a Bluetooth device is connected and actively printing the only other functions available
are On/Off and Cancel. When connected, you can send pictures from your Bluetooth device. Your
Kodak ESP·3 All-in-One printer supports connection to only one Bluetooth device at a time and has
an 8 MB file size limitation.
20 Kodak ESP·3 All-in-One
To Next Page
Loading...
