6 Scan
User Guide 33
6 Scan
Scanning is the process of converting text and pictures into an electronic format for your
computer. The Scan mode becomes active when you press Scan. The Scan status light is always
on when your AiO printer is in Scan mode. To use the scan features, your AiO printer must be
connected to a computer.
Important Use the Kodak AiO Home Center software to configure scan settings for the control
panel.
Scan from Control Panel (Windows)
To scan to a file
1 Set the Default scan destination to File with the Kodak Home Center software (see Home
Center Help).
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan. The original is scanned and saved to a file on your computer according to the scan
settings in the Kodak Home Center software.
To scan to an application
1 Set the Default scan destination to Application with the Kodak Home Center software (see
Home Center Help).
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan. The original is scanned into Kodak Home Center where you can open it with the
application of your choice.
Scan from Control Panel (Macintosh)
To scan to a current settings name and location
1 Set the Scan Destination to File with the Kodak Home Center software (see Home Center
Help).
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan. The original is scanned and saved to a file on your computer according to the scan
settings in the Kodak Home Center software.
To scan and select name and location
1 Set the Scan Destination to Application with the Kodak Home Center software (see Home
Center Help).
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan.
4 Select a destination from the Save dialog on the computer.
To Next Page
Loading...
