Support
3 Squeeze the paper guide and slide it to the right until it touches the edge of the envelopes.
Multiple-page Document in Reverse Order
Probable Cause
The printing settings in the printer driver are set to print the first page of your document first.
Corrective Action
Configure the printer driver to print the document in reverse order so the pages will be in the
correct order when printing is complete.
To set a Windows PC to print in reverse order
1 Open Printers and Faxes.
2 Select your Kodak AiO printer in the Name column.
3 Click on Select printing preferences on the Printer Tasks list.
4 On the General tab, select Print last page first.
To set a Macintosh to print in reverse order
1 On the File menu, select Print.
2 On the Print dialog, select Paper Handling
3 Select the Reverse Page Order option.
PictBridge Camera not Detected
• Check the USB connections from the PictBridge compatible camera or device to the printer.
• If disconnected, reconnect the USB cable from the PictBridge compatible camera or device to
the printer.
• Make sure there is at least one picture in the PictBridge compatible camera or device’s internal
memory or memory card.
• Make sure the connected camera or device is PictBridge compatible. See your camera or device
user’s guide for details.
• Check the camera batteries.
Picture Cropped
• Change the picture quality setting (or resolution) on your digital camera to 3:2. See your
camera user’s guide for details.
• Adjust cropped pictures using the Kodak Home Center or other image editing software on your
computer.
• If you are printing from an application on your computer, select the proper paper size from the
printer options.
Note Cropping may vary depending on the selected picture size and size of the output paper.
The
dimensions of the photo on the camera are slightly different than each paper size so a
portion will be cropped to fit perfectly on whatever paper size was selected.
User Guide 51
To Next Page
Loading...
