A-61560 April 2008 101
Scan Area dialog
box
The Scan Area dialog box allows you to define the amount of image
data which is returned to the host. The area can be defined in Pixels,
Inches or Centimeters.
To access the Scan Area dialog box, select Scan Area on the Layout
tab.
NOTE: Select the side and image to be defined by highlighting Front
Image #1, Front Image #2, etc. based on the cropping option
selected for each of these in the main ISIS Driver window. The
scan areas defined for all camera selections are independent.
The Scan Area dialog box is only available when Fixed to Transport or
Relative to Document is selected on the Scanner Settings dialog box.
Page Size ⎯ the default paper size is set when a scanner is first
selected. You can choose a different paper size using the drop-down
list.
To Next Page
Loading...
