114 A-61560 April 2008
Running a transport
cleaning sheet
1. Remove the wrapping from the Transport Cleaning Sheet.
2. Adjust the side guides to fit the cleaning sheet.
3. Place a transport cleaning sheet in the input tray (adhesive side up)
in portrait orientation.
4. Using your scanning application, scan the transport scanning sheet.
5. After the transport cleaning sheet is scanned, turn it over and scan it
again.
6. Open the scanner cover and wipe the imaging guides with a lint-free
cloth.
7. Close the scanner cover and check your image quality.
8. Repeat this procedure, if necessary until all residue is removed from
the drive rollers.
9. When a transport cleaning sheet gets very dirty, discard it and use a
new one.
To Next Page
Loading...
