10 A-61560 April 2008
When the installation is complete, the Installation Completed
window will be displayed.
7. Click Finish.
8. When the software is finished installing, click Exit and remove the
CD from the CD-ROM drive.
Linux operating systems Install the driver software before connecting the scanner to your PC.
NOTES:
• Depending on the operating system you are installing on (Ubuntu,
Fedora, or SUSE) the following procedures may be slightly different.
• Kodak Scanner software requires glibc 2.4 or greater and QT3. Verify
that your system has these installed (e.g., Fedora:
Applications>Add/Remove Software).
• You must be a super user to install the software.
1. Insert the Kodak Scanner installation CD in the CD-ROM drive of
your computer. The installation program starts automatically.
2. Open a terminal.
3. Change the directory to the CD folder.
4. Change the directory to the linuxx86 directory.
NOTE: On Ubuntu operating systems, you may need to copy the
linuxx86 folder to the desktop and change the permissions
on the setup script using: chmod u+x setup
5. Run ./setup and follow the prompts.
6. When finished, press Enter to exit.
To Next Page
Loading...
