42 A-61560 April 2008
Scan Validation
Tool dialog box
The Scan Validation Tool (SVT) is a diagnostic application provided by
Kodak. The SVT user interface allows access to all the features of the
scanner and is a good way to verify that the scanner is working
properly. The Scan Validation Tool allows you to verify scanner
functionality using both the TWAIN datasource and the ISIS driver.
Toolbar buttons
Save Images to Files — when selected, will save the images to the
specified directory.
Display Every ⎯ enter the sampling rate of the images you want to
display while scanning. For example, to see every image, enter a value
of 1. To see every 10
th
image, enter a value of 10.
Setup — displays the user interface for the selected driver.
Destination — allows you to select a directory to store scanned
images and their file names. This option is only available when
Save Images to Files is selected.
Start Scanning — scans the documents in the input tray.
Scan One Page — scans only one page.
Stop Scanning — ends the scan session.
License Key — displays the License Key window
No Image Display mode — closes the Image Viewer window
(no images will be displayed).
One Image Display mode — displays one image at a time.
Two Image Display mode — displays two images at a time.
Four Image Display mode — displays four images at a time.
Eight Image Display mode — displays eight images at a time.
To Next Page
Loading...
