8 A-61560 April 2008
Installing the Kodak
Driver Software
Windows operating
systems
Install the driver software before connecting the scanner to your PC.
1. Insert the Kodak Scanner installation CD in the CD-ROM drive of
your computer. The installation program starts automatically.
NOTES:
• If the CD does not start automatically, open the My Computer
icon on your desktop. Double-click the icon for your CD-ROM
drive, then double-click on Setup.exe.
• The i1200 and i1300 Series Scanners have separate installation
CDs. If you have both scanners in your environment, be sure to
use the correct installation CD.
2. Select Install Scanner Software.
3. The Kodak i1200/i1300 Series Scanner Installation window will be
displayed.
NOTE: This window may or may not be displayed depending upon what
was previously installed on your computer.
To Next Page
Loading...
