A-61560 April 2008 17
3 Using the Scanner
Turning the scanner
on and off
• Press the button on the back of the scanner to turn the scanner on (I)
or off (O).
After you turn on the scanner, wait for it to complete the self-test. When
the scanner is connected to the host PC and the self-test completes,
the green indicator light will remain on and constant and the function
window will display “1”.
If the scanner is not connected to the host PC and the self-test
completes, the red indicator will be on and the function window will be
blank.
Scanner positions The Kodak i1200 and i1300 Series Scanners are equipped with a tilt
feature which allows the scanner to be used in two positions.
Depending upon your scanning needs, you can tilt the scanner body
and position the input and output trays. The tilt feature also allows
scanning in tight spaces when space is limited and stores easily when
not in use. The following illustrations show the angles the scanner can
be placed in. Simply press the tilt release button and tilt the scanner
body into a 25- or 65-degree angle.
25-degree angle
To Next Page
Loading...
