A-61560 April 2008 21
• When using the output tray extender and scanning smaller
documents or mixed sized documents, you can improve your
document stacking performance by using the exit deflector. The exit
deflector is easily installed by snapping it into place.
NOTE: Remove the exit deflector before tilting the scanner to the
upright position (65-degree angle).
Adjusting the input
tray
You can scan documents with the input tray open or closed. Feed
documents with the input tray open if you are scanning a batch of
documents. You can tilt the scanner body to a more upright position to
save working space.
If space is limited and you want to close the input tray, you can easily
feed documents one at a time.
NOTE: The scanner cover cannot be opened when the input tray is
closed.
Input tray - open position Input tray - closed position
To Next Page
Loading...
