40 A-61560 April 2008
Scanning your
documents
Standard paper size documents should feed easily through the scanner.
The input tray will hold up to 75 documents for batching scanning.
• If you have a Kodak i1210 or i1310 Scanner or are scanning one-
sided documents only, place the documents you want to scan into the
input tray of the scanner. The documents should be placed with the
side you want to scan facing the input tray.
• If you have a Kodak i1220 or i1320 Scanner or are scanning two-
sided documents, place the documents in the input tray with the front
side of the documents facing the input tray.
Automatic feeding To scan a batch of documents, follow the guidelines for size, type,
quantity, etc., in the “Document preparation” section.
IMPORTANT: Staples and paper clips in documents may damage the
scanner. Remove all staples and paper clips before
scanning.
1. Align the leading edges of the stacked documents.
2. Position the leading edge of the documents centered and facing the
back of the scanner, as shown.
3. Adjust the input tray side guides.
4. Adjust the output tray position, if necessary.
5. Start scanning.
Manual feeding Follow the guidelines for document size, type, weight, quantity, etc.
Position the leading edge of the document you want to scan in the input
tray with the side you want to scan facing the input tray, then start
scanning.
To Next Page
Loading...
