Kodak i1200 - System Requirements for Installation; Installing the Scanner Hardware

A-61560 April 2008 7
System
requirements
Following is the minimum recommended system configuration to run
Kodak i1200/i1300 Series Scanners.
• Recommended PC configuration:
- For documents up to 356 mm (14 in.) long up to 400 dpi: Pentium
IV, 3.2 GHz processor, 512 MB RAM
- For documents up to 660 mm (26 in.) long up to 400 dpi: Pentium
IV, 3.2 GHz processor, 1 GB RAM
- For longer documents/higher resolutions: Pentium IV, 3.2 GHz
processor, 3 GB RAM
• USB port 2.0 (compatible with USB 1.1 but at slower speeds)
• Supported operating systems:
- Microsoft Windows Vista (32-bit and 64-bit)
- Microsoft Windows Vista SP1 (32-bit and 64-bit)
- Microsoft Windows XP SP2 (32-bit and 64-bit)
- Microsoft Windows XP x64 Edition
- Microsoft Windows 2003 Server x64 Edition
- Microsoft Windows 2000 Professional SP4
- Linux Ubuntu 6.0.6+
- Linux SUSE 10.x+
- Linux Fedora 7+
• 100 MB free hard disk space
• CD-ROM drive
Included Drivers:
• Windows operating systems: TWAIN, ISIS, WIA
• Windows 2000: TWAIN, ISIS, STI
• Linux distributions: TWAIN and SANE
Installing the
scanner
Install the scanner in the following order:
1. Install the Kodak Driver Software on the PC.
2. Connect the power cord to the scanner.
3. Connect the USB cable between your scanner and PC.
4. Attach the output tray.
5. Turn on scanner power and finalize the Kodak Driver Software
installation.
6. Verify your scanner installation (see Chapter 3).
7. Install other supplied scanning applications (See Chapter 3).