A-61854 April 2016 2-15
Optional Wireless Directly
(ad hoc) options
Scanner’s SSID — it is recommended that you keep the default SSID.
If you need to change it, contact your network administrator for the
proper naming convention. All wireless devices on a WLAN must use
the same SSID in order to communicate with each other. Up to 32
characters can be entered in this field.
Country — select the country that the scanner will reside in.
Channel — select the desired channel.
BandWidth — select the desired bandwidth.
AP Security Options — the following options are available for
encrypting data between the sender and the receiver when using a
wireless connection.
• None
• WPA Personal [TKIP]
• WPA2 Personal [AES]
• WPA/WPA2 Personal
Security key — enter the security key to be used in conjuction with the
selected security option. Your key must be between 8 and 63
characters, and may be a phrase using special characters.
NOTE: If you want to know more about wireless security standards do
an internet search for Wireless Security Standards.
Save — when selected, displays all of the settings that will be applied
to the scanner. This represents all of the changes to your scanner’s
configuration as well as all of the settings made on the Network and
Device tabs.
To Next Page
Loading...
