Kodak ScanMate i1150WN - System Requirements

A-2 A-61854 April 2016
System requirements Following is the recommended system configuration to run the Kodak
ScanMate i1150WN and i1190WN Scanner:
• Intel Atom D525/D2550, 1.8 GHz
•2 GB RAM
• Network card (wired or wireless)
• USB 2.0 High Speed
ScanMate+ Mobile App Operating System support:
•iOS 7.1
•iOS 8.3
•iOS 8.4
•iOS 9.2
• Android 4.2
• Android 4.4
• Android 5.0
Supported operating systems:
• Microsoft Windows Vista with SP1
• Microsoft Windows Vista x64 Edition
• Microsoft Windows 7 (32-bit and 64-bit) with SP1
• Microsoft Windows 8 and 8.1 (32-bit and 64-bit)
• Microsoft Windows 10 (32-bit and 64-bit)
• Microsoft Windows 2008 Server x64 Edition
• Microsoft Windows 2012 Server x64 Edition
Included Drivers:
• Windows operating systems: TWAIN, ISIS, WIA
Environmental Factors Energy Star qualified scanners
Power Consumption -
Scanner
Off mode: < 0.2 watts
Operating: < 28 watts
Idle/Ready: < 15 watts
Sleep/Energy Star < 3.5 watts
Acoustic Noise
(Sound Pressure level)
Operating: less than 64 dB(A)
Idle mode: less than 41 dB(A)
Bundled Software TWAIN, ISIS, WIA Drivers, Smart Touch and Kodak Capture Pro Software
Limited Edition
TWAIN Drivers available from: www.kodakalaris.com/go/scanners
ScanMate+ Mobile app available from: www.kodakalaris.com/go/scanners