A-61854 April 2016 2-3
NOTES:
• Along with the scanner drivers, the Setup and Connect Scanner
Wizard is also installed. Whenever you want to change the scanner’s
connection option, you will need to run this wizard. For example, if
the scanner is configured to scan using a USB connection, and you
want to change it to a Wired Network connection, run the wizard and
follow the prompts to change the connection option.
• If the scanner is going to be shared by multiple users, the Kodak
Software driver needs to be installed on each computer.
When the
scanner is being shared with more than one user, the scanner’s
Operator Control Panel will display the name of the user who is
currently using the scanner and who will receive the scanned images.
Connection options
between the computer and
scanner
When using the Installer to configure the scanner, these options are
available.
Description
Both the PC and the scanner are on a wireless
network.
The PC is connected to the network using an
Ethernet cable and the scanner is on a wireless
network.
Both the PC and the scanner are connected to
the network using an Ethernet cable.
The PC is using a wireless network and the
scanner is connected to the network using an
Ethernet cable.
Both the PC and the scanner are on a wireless
network and are not using a network router.
The scanner is connected to the PC using a
USB cable.
The PC is on a different network than the
scanner and the scanner is connected to
another network wirelessly.
The PC is on a different network than the
scanner and the scanner is connected to
another network using a network cable.
To Next Page
Loading...
