Kodak ScanMate i1150WN - Scanner Components

A-61854 April 2016 1-3
Scanner components
Front view
1 Output tray — collects the scanned documents. The output tray
can be pulled out and extended to accommodate documents up to
35.56 cm (14 inches) in length.
2 End Stop — can be lifted up when scanning documents for better
document stacking.
3 Ledge — for holding a small reference document.
4 Scanner cover — provides access to internal components such as,
the imaging area and the feed and separation rollers.
5 Gap release — allows you to manually adjust the space between
the feed roller and separation roller for documents that require
special handling (e.g., documents that are badly torn). When using
the gap release, pull the gap release out to feed special documents.
When finished, push the gap release back in place.
6 Side guides — the side guides can be moved in and out to
accommodate the size of the documents you are scanning.
7 Input tray — the input tray on the scanner holds up to 75
documents (20 lb./80 g/m
2
) and can be extended to accommodate
documents up to 35.56 cm (14 inches).
5
4
3
2
1
10
7
6
9
8