3-2 A-61854 April 2016
NOTE: Keep the end stop down when scanning documents longer
than A4 (11.7 inches).
NOTE: When scanning small documents (e.g., credit cards, US
driver’s license, etc.), the document must be fed through
the scanner in portrait orientation.
Getting your
documents ready to
scan
1. Remove all staples and paper clips before scanning. Staples and
paper clips on documents may damage the scanner and
documents.
2. All inks and correction fluids on the paper must be dry before
scanning is started.
3. Standard paper size documents feed easily through the scanner.
When organizing your documents for scanning, stack the
documents so the lead edges are aligned and centered in the input
tray (face down). This allows the feeder to introduce documents into
the scanner one at a time.
4. Place the documents you want to scan in the input tray. Be sure the
front side of your document(s) is positioned against the input tray
and the top of the document(s) is inserted into the input tray first.
Input tray
extension for
long documents
Output tray
extension and
end stop
To Next Page
Loading...
