Koden MDC-1840BB - TM RESET (True Motion Center Reset); Adjust Menu; Adjust; Screen Contrast Settings

Chapter 6 MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series
Using The Menu Operation Manual
6-10 93142122-07
NAV ALIGN MODE Navigation Display Align Mode OFF, MANUAL, SERIAL
MAP Map Display OFF, ON
MAP DATUM Map Display Datum NONE, WGS84, WGS72,
SGS85, PE90
GPS DATUM GPS Datum See NOTE
REFERENCE
LOCAL
NOTE: The GPS DATUM (REFERENCE or LOCAL) is shown only when SERIAL is
selected as NAV ALIGN MODE.
6.2.3.8 TM RESET (True Motion Center Reset)
When this function is activated, the picture center position is reset to the position
designated by the SYSTEM/SYS SETUP/TM RESET menu.
Indication Meaning Selection
TM RESET True Motion Center Reset No choice
6.2.3.9 PAST CRS (Own Ship's Past Course)
When this function is selected, the course own ship has traveled past is displayed in a
line form plotted at a predetermined interval.
Indication Meaning Selection
PAST CRS Own Ship's Past Course OFF, EVERY, 15SEC,
30SEC, 1MIN, 3MIN,
6MIN, 12MIN
6.3 ADJUST MENU
The ADJUST menu has two sub menus; ADJUST and PRESET.
Details of each sub menu are as follows:
6.3.1 ADJUST
6.3.1.1 Screen Contrast Settings
Indication Meaning Selection
VIDEO CONTR Radar Video Contrast 0 to 99
Changes the brilliance of the radar echo presentation.
Indication
Meaning Selection
MARKER CONTR Marker Contrast 0 to 99
Changes the brilliance of various markers, Parallel Cursor, Heading Line, Alarm Zone,
and Cross Cursor.