Kohler KDW 1603 - 9 Cooling System

1
6
7
8
9
4
5
3
2
10
140
9
- 74 - - 74 -
Danger – Attention
- The uid coolant circuit is pressurized.
- Inspections must only be made when the engine has cooled and even in this case, the radiator or expansion
chamber plug must be unscrewed with the utmost caution.
- If an electric fan is installed, do not approach a hot engine since the fan itself could start up even when the engine is
at a standstill.
- Coolant uid is polluting, it must therefore be disposed of in the correct way. Do not litter.
COOLING SYSTEM
COOLING SYSTEM LAYOUT
Workshop Manual KDW 1603_2204_2204/T _ cod. ED0053029180 - 1° ed_rev. 00
Components:
1)Coolantllcap    6)Thermostat
2)Expansiontank    7)Fan
3)Cylinderblock     8)Radiator
4)Circulatingpump    9)Temperaturesensor
5)Coolanttemperaturewarninglamp 10)Heatexchanger(KDW2204T).