TP-6745 7/10 7Introduction
Introduction
This manual provides service information for Kohlerr
Model KEP service entrance transfer switches with
MPACt 1500 electrical controls. It includes operation,
troubleshooting, repair, and maintenance procedures
for the transfer switches and electrical controls.
The information included in this manual is intended
solely for use by trained and qualified service personnel
of authorized service distributors/dealers.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this literature and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment service requirements are very important
to safe and efficient operation. Inspect parts often and
perform required service at the prescribed intervals.
Obtain service from an authorized service distributor/
dealer to keep equipment in top condition.
List of Related Materials
Figure 1 lists the part numbers for related literature.
Separate operation and installation manuals contain
operation and installation information not provided in
this manual. Refer to the parts catalog for instructions to
obtain replacement parts.
Document
Document
Part Number
MPACt 1500 Controller Operation
Manual
TP--6714
Model KEP ATS Operation/Installation
Manual
TP--6738
Model KEP Parts Catalog TP--6741
Model KEP Wiring Diagram Manual TP--6744
Figure 1 Related Materials
To Next Page
Loading...
Need help?
General
