What does DISCONNECT from server mean on Konica Minolta Printer?
If your Konica Minolta printer shows 'DISCONNECT' from the server, it means the connection to the server was cut. Consult with your network administrator.
What to do if Konica Minolta Printer has FTP SERVER ERROR?
If your Konica Minolta printer shows 'FTP SERVER ERROR', it means the scan data couldn't be correctly uploaded to the FTP server. Consult with your network administrator.
Why does my Konica Minolta Printer display MEMORY FILE FULL?
The 'MEMORY FILE FULL' message on your Konica Minolta printer indicates that the maximum number of stored files was reached while sending an email. Retrieve the transmission data stored in the memory.
What to do if Konica Minolta Printer shows NOT ACCEPTED PASSWORD?
If your Konica Minolta printer displays 'NOT ACCEPTED PASSWORD', it means the secure print password entered is incorrect, and the document can't be printed. Type in the correct password.
What does SERVER MEMORY FULL SMTP Server mean on Konica Minolta Printer?
If your Konica Minolta printer displays 'SERVER MEMORY FULL SMTP Server', it means the SMTP server's memory is full while sending an email. Consult with your network administrator.
Why is SECUREPRINT IS NOT AVAILABLE on Konica Minolta Printer?
The 'SECUREPRINT IS NOT AVAILABLE' message on your Konica Minolta printer means the expanded memory unit isn't installed, so the Secure Print setting can't be selected. The job is cancelled.
What to do if Transmission is not possible on Konica Minolta Printer?
If transmission is not possible on your Konica Minolta printer, it means the connections are incorrect. Check the indicators on the hub and verify the connections.
Why is the text in the window disorganized on Konica Minolta Printer?
If the text in the window is disorganized on your Konica Minolta printer, it means the browser is too small. Increase the size of the browser.
Why are there streaks in my Konica Minolta bizhub 163 All in One Printer copies?
Streaks in copies from your Konica Minolta All in One Printer can occur for several reasons: * If you're copying a thin double-sided document, the information on the back might be showing through. In this case, press the [Density] key and select a lighter density setting. * The original glass may be dirty. Wipe it with a soft, dry cloth. * The document pad may be dirty. Clean it with a soft cloth dampened with a mild detergent. * If the original document is printed on highly translucent material, place a blank sheet of paper on top of the document.
How to fix a Konica Minolta bizhub 163 All in One Printer copy that is too light?
If your Konica Minolta All in One Printer is producing copies that are too light, it could be due to the copy density setting or the paper being used. * Check the copy density: Press the [Density] key and select a darker copy density. * Check the paper: If the paper is damp, replace it with new paper.
General| Print Technology | Laser |
|---|---|
| Print Speed | 16 ppm |
| Max Paper Size | A3 |
| Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Connectivity | USB 2.0 |
| Paper Input Capacity | 250 sheets |
| Paper Output Capacity | 100 sheets |
| Memory | 32 MB |
| Type | Monochrome |
| Duplex Printing | Manual |
| Network Connectivity | Optional |
| Dimensions | 570 x 531 x 449 mm |
| Zoom Range | 50% - 200% |
To Next Page
